Finding water around your water heater is unsettling. You don’t know yet if it means a small part swap or a flooded utility room, and the tank isn’t telling you. Here’s the short answer: most water heaters leak for one of six reasons. Internal tank corrosion, sediment buildup, excess pressure, a discharging temperature and pressure … [Read More]

If your home was built between 1978 and 1995 and you’ve never had your plumbing checked, there’s a real chance your walls are hiding a ticking clock. Polybutylene pipes were installed in millions of American homes during those years, and Maryland got more than its fair share. In Anne Arundel County alone, officials estimated that … [Read More]

You turned on the shower, waited, and… still lukewarm. Cold, even. You checked the water heater. It’s running. So what’s going on? Here’s the thing: a lack of hot water doesn’t always mean your water heater is broken. In fact, some of the most common causes have nothing to do with the heater itself. At … [Read More]

You checked. There’s nothing blocking the drain. But every flush is still weak, sluggish, or just doesn’t finish the job. Sound familiar? Here’s the thing: a slow-flushing toilet doesn’t always mean there’s a clog. In fact, some of the most common causes have nothing to do with what’s in the drain at all. If you’re … [Read More]

You turn on the shower and the water barely trickles out. The dishwasher takes forever. The kitchen faucet drags. Something is off, but the aerator looks fine, and you can’t figure out where the problem is actually coming from. That’s the thing about low water pressure. The most frustrating part isn’t the weak flow. It’s … [Read More]

You poured Drano down your drain last night before bed. Now it’s morning, and you’re wondering if your pipes are okay. Here’s what typically happens: Drano Max Gel should only sit in your pipes for 15 to 30 minutes maximum. Anything longer increases your risk of damage, especially if you live in an older home … [Read More]